Ayoob: Is Your Trigger Finger Placement Wrong?

Grady Trent14 hours ago

0 492 5 minutes read

Ayoob: Is Your Trigger Finger Placement Wrong?

We’ve all heard the saying “the devil is in the details.” At least sometimes, we have to balance that with the words of the great architect Ludwig Mies Van Der Rohe: “God is in the details.

It’s true in a lot of things, and it’s certainly true in shooting. Let’s look at one such detail: the exact placement of finger on trigger.

The placement of your trigger finger can drastically impact your accuracy. Too much — or too little — finger on the trigger can shift the point of impact.

Conventional Wisdom

In the history of handgun training, the standard rule was that the pad of the trigger finger would be the contact point on a gun with a short, relatively light trigger pull, and the distal joint for a pistol with a long and heavy pull.

define trigger pad and distal joint — Defining our terms. Pad centers the whorl of your fingerprint on the trigger face, while the distal joint placement is at the “power crease.” Image: Gail Pepin

Let’s define our terms. The pad is best defined as the whorl of the fingerprint centered on the face of the trigger. Double-action revolver masters recommended what was called the “power crease”: the distal joint of the index finger on the palmar surface.

1911 with long and short triggers — 1911 pistols can be had with long triggers (such as the Springfield Armory Ronin on the left) or short triggers (Springfield Mil-Spec on the right). Image: Gail Pepin

There was a reason for that term “power crease.” Here’s how you can see for yourself.

You don’t even need a pistol. Take the index finger of your non-dominant hand, extend it, and stiffen it up. We’re going to pretend that finger is a trigger with a heavy pull. Point the fingerprint away from you.

Now, with the trigger finger of your gun hand, place the pad on the support hand finger and pull it toward you while the still finger is resisting. Assess how much force it takes to move it. When it does move, it may move in fits and starts.

power crease finger placement with 1911 milspec — With short 1911A1 type trigger, average size male hand is ideal for “power crease” finger placement. Image: Gail Pepin

Now, do that again, but with the “power crease” of the distal joint pulling the finger that is now the trigger. You’ll find you have much more strength, born of leverage, to smoothly roll that finger back.

Finally, triple-check an empty gun and point in a safe direction for dry fire and do the same, pad versus distal joint. It will feel as if a couple of pounds of pull weight have been removed from the trigger.

The Trigger Reach Dimension

Every marksmanship manual tells you to buy a gun that fits your hand … and most of them then neglect to tell you what the fit criteria are! The key dimension is trigger reach.

longer reach of Prodigy trigger — The author is demonstrating “pad placement” of the finger on the trigger of this Springfield Prodigy Compact 9mm. Image: Gail Pepin

On the gun, it’s measured from the center of the backstrap of the frame at the top, where the web of the hand should rest in a proper high hold, to the center of the face of the trigger. On the hand, it is measured from the center of the web of the hand in line with the long bones of the forearm to the chosen point on the trigger finger.

The object of the whole measurement is to finish with a grasp on the pistol that will give the shooter the maximum ability to press the trigger straight rearward without deviating the muzzle of the gun from point of aim.

Let’s look at the ever-popular 1911 pistol. In its first iteration in 1911, it had a long trigger. After WWI, returning troops were surveyed as to how issue weapons could be made to work better for them. One complaint on the 1911 was that the trigger reach was too long. (Bear in mind that a century ago, Americans were shorter on average than now, with proportionally shorter fingers.) Accordingly, when almost a hundred years ago the 1911A1 came out, it had a much shorter trigger and the frame behind the trigger was “niched out” to allow still more finger inside the trigger guard.

(Learn more about the history of the 1911 versus the 1911A1 here.)

finger placement on Echelon trigger — The Springfield Echelon’s short trigger reach is ideal for distal joint placement with most hand sizes, if the shooter wishes. Image: Gail Pepin

Today, most 1911-style pistols have the long trigger of the original, and virtually all have that niche in the frame. However some, like the Springfield Armory Mil-Spec 1911A1, have the short trigger. This turns out to fit smaller hands better. Little known fact: It also allows the hand of today’s average-sized adult male hand to take advantage of distal joint placement to allow greater leverage and require what feels like less pressure to fire the pistol.

index finger trigger pad — Try this exercise. Support hand trigger finger gives stiff resistance as gun hand’s index finger uses pad placement and pulls back, assessing force… Image: Gail Pepin

One thing this writer appreciates in the Springfield Armory XD, XD-M and Echelon product lines is a short trigger reach, which allows distal joint trigger finger placement while the barrel of the gun is still in line with the long bones of the forearm.

distal joint trigger pull — …then do the same with distal joint of trigger finger, and feel how much leverage increases. Image: Gail Pepin

Beware the “h-Grip”

The “h-Grip” is so called because, to get more finger onto the trigger for greater leverage, the pistol is turned in the hand so that the base of the thumb is directly behind the grip-frame — and the line of recoil.

h-grip demonstrated by author — This is the “h-Grip.” Good news: finger gets deeper into triggerguard. Bad news: recoil goes directly into base joint of the thumb with little skeleto-muscular support directly behind the gun. Image: Gail Pepin

It’s a Band-Aid fix for getting more finger on the trigger, and it works okay with the minimal recoil of a .22, but it greatly compromises recoil control with any more powerful handgun. This causes greater muzzle rise, which slows re-alignment between shots, and it also beats the hell out of the proximal joint of the thumb.

I’ve asked hand surgeons, “Would constant recoil from this hold artificially induce arthritis in the proximal joint of the thumb?” The answer has always been “Yeah, it’ll do that eventually.”

Try for Yourself

Try for yourself, drill for drill, with the pad of your index finger on the trigger and then with the distal joint. The quest for excellence is always advanced by trying new techniques and giving them a fair chance. You might be surprised at what you learn.

Editor’s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the “Go To Forum Thread” link below to jump in!