Tactical

MRDS: Micro Red Dot Sight Buyer’s Guide

MICRO RED DOT SIGHTS ARE ALL THE RAGE, AND WE’RE SEPARATING THE BEST FROM THE REST

As technology advances, it normally gets smaller, cheaper, and better. It was only a matter of time before red dots got small enough to fit on our pistols. While it might have started in the ‘90s, the technology is fully matured now and is absolutely the modern standard. Welcome to the micro red dot sight (MRDS) era.

Everything you need to know so you can choose the right optic for your application coming up.

MICRO RED DOT SIGHT (MRDS) VS. RED DOT SIGHT (RDS)

Micro red dots are precisely what you might think they are; they’re smaller red dots. 

While full-size red dots might be the standard as primary optics on rifles of all flavors, micro red dots are designed for smaller applications. They can still be used as primary sights on larger guns, but that isn’t super common.

MRDS and RDS optics

What the MRDS shines in is for mounting on pistols!

They are also prevalent as backup sights for rifles when mounted either on top of the main optic, like piggybacked on an ACOG, or used in a 45-degree off-set mount like with many LPVOs.

Since MRDS are designed for small applications like pistol slides or as secondary optics on top of or next to full-size optics, you need a way of mounting these little buggers to whatever it is you’re working with.

1913 railing might be the standard for larger optics, but it’s too big for MRDS in most applications.

While there are a few common footprints, there is no proper standard to which all MRDS adhere. And to make it even more annoying, half the time, the MRDS documentation won’t even clearly state what footprint it uses since the manufacturer doesn’t want to mention its competitor’s name the footprint is named after… thanks, guys.

walther q4 holosun
Walther with an RMR mounting plate for a Holosun 507C

What this leaves you with is some guesswork at times. For this guide, I’ll list each footprint, but this only helps if you decide on one of these optics.

The most common footprint by far is the Trijicon RMR. Runners-up also include Leupold’s Delta Point Pro and the Shield RMSc footprints.

If your pistol slide or mounting system isn’t cut for the footprint of the optic you want, you can normally get mounting plates to convert from one style to the other. This is dependent on your mounting system, so double-check before you buy.

DOT SIZE

Dot size is literally how large your dot is measured in MOA (minute of angle). Many MRDS are offered in multiple dot sizes, so it helps to know the pros and cons of each.

Basically, it comes down to your choice, but I’d recommend going as small as possible.

Large dot sizes (4+ MOA) are great for picking up really fast if you’re not used to using an MRDS. However, it means more of your target is going to be hidden by the dot, limiting your precision.

We added a SureFire Mini Scout Light to the M-LOK slot on the barrel clamp, but doing so left us without a good option for mounting a sling. While we toyed with the idea of cutting a slot in the forend, we have a feeling it’s gonna be 550 cord to the rescue …

That said, it really isn’t as bad as it might seem – at least for pistols. A 2 MOA dot (my personal favorite) covers half an inch of the target at 25 yards. A 6 MOA dot will cover 1.5 inches of the target at the same 25 yards.

If you’re planning to use an MRDS on a rifle as a primary or backup sighting system, the dot size is more important. 

A 2 MOA dot will only cover 2 inches of your target at 100 yards, but the 6 MOA dot will cover 6 inches of the target.

At 200 yards, the 2 MOA dot only covers 4 inches of the target while the 6 MOA dot covers a crazy 12 inches of the target.

This quickly becomes a case of your dot actively working against you instead of for you.

Play around with different dot sizes if you can to see what fits you best, but keep this in mind.

BEST MICRO RED DOT SIGHTS (MRDS)

Trijicon RMR

PROS

  • Proven Durability
  • Reliable Design
  • Gold Standard

CONS

  • Changing the battery requires the optic to be removed and re-zeroed
  • Smaller window
  • Strong glass tint

SPECS

  • Footprint: RMR
  • Dot Size: 3.25 MOA
  • Window Size: 22x17mm
  • Battery Life: 35,000+ Hours
  • Open Emitter

Arguably the MRDS that started it all – the Trijicon RMR is still a gold standard other red dots are held against.

While the Type 1 proved not durable enough for pistol mounting (and it wasn’t meant to be), the Type 2 RMR (the current version) has established itself in every environment possible and is widely adopted by LEO and military groups around the world.

Glock 19 gen 5 C&H precision plate
Glock 19 Gen 5 with a Trijicon RMR

If you want the best right out of the box, you won’t go wrong with an RMR. It comes in a lot of flavors, but my personal favorite is the RM-06 with a 3.25 MOA red dot, 4-year battery life, automatic brightness adjustment or 8 brightness settings you can choose from.

The sight window is 22 x 16mm.

MSRP isn’t cheap at $720, but the street price is really around $450.

Trijicon RMR

The RMR also set the standard for mounting footprints. While not everyone uses an RMR footprint, most of the MRDS market does.

Brownells $480
Palmetto State Armory $500
OpticsPlanet $488

While the RMR is unarguably the most durable MRDS, it does lack a lot of features other red dots have mastered. From shake awake to solar to being able to change the battery without removing the optic, the RMR is behind the curve in most respects.

Still, for a duty-quality red dot – the RMR is a solid pick.

Trijicon RMRcc

PROS

  • Durable Design
  • Familiar Look & Fee

CONS

  • Same overall cons as the larger RMR
  • Unique footprint that is not well supported by manufacturers
  • A Half-Step Design

SPECS

  • Footprint: RMRcc
  • Dot Size: 3.25 MOA
  • Window Size: 19x14mm
  • Battery Life: 35,000+ Hours
  • Open Emitter

The newest MRDS from Trijicon is basically the same thing – but even smaller. Designed for sub-compact and micro-compact applications, the RMRcc is really just the RMR but made smaller. 

The battery lasts four years and is still located under the optic, so you need to remove it to replace the battery. You get 8 brightness settings or can set the RMRcc to auto adjustment. And it’s still offered in either 3.25 MOA or 6.5 MOA models.

Sadly, the RMRcc doesn’t use the RMR footprint. Instead, it uses an all-new footprint unique to the RMRcc. This makes mounting it kind of annoying since you either need a pistol cut specifically for the RMRcc or you need a mounting plate.

Plates aren’t hard to get or use, but it’s something to remember. If you want the lowest profile possible, you’ll have to get your slide milled.

Palmetto State Armory $450
Brownells $470
OpticsPlanet $500

Since the RMRcc is physically smaller to fit on smaller guns, the window is a kind of tiny 18.7 x 12.8mm.

MSRP is $700, but the street price is about the same as the RMR at $450-ish.

Trijicon SRO

PROS

  • Huge Window
  • RMR Footprint For Easy Mounting
  • Top Mounted Battery
  • Multiple MOA Options

CONS

  • Less Durable Than RMR
  • Strong Window Tint

SPECS

  • Footprint: RMR
  • Dot Size: 1, 2.5, and 5 MOA options
  • Window Size: 25x22mm
  • Battery Life: 26,000+ Hours
  • Open Emitter

With the RMR being one of the kings of CCW/duty MRDS, Trijicon decided it wanted to shake up the competition world in a big way – enter the SRO.

To be clear, the SRO is not really designed for duty or CCW. You can use it for those applications, but the SRO is significantly less durable than the RMR or many other MRDS options. The SRO really is designed for square range competition.

Beretta LTT with Trijicon SRO

The SRO features a large window to make acquiring the dot faster. It has a top loading battery that lasts for 3 years, 8 brightness settings, auto adjustment, and is waterproof up to 3 meters.

Best of all (to me), the SRO comes in 3 flavors of dot – 1 MOA, 2.5 MOA, and 5 MOA. Personally, I like the 1 MOA.

The sight window is a luxurious 25 x 22.5mm.

MSRP is $770, but again, the street price is much lower, around $550.

Palmetto State Armory $518
Brownells $520
OpticsPlanet $525

For pistol competitions, like USPSA or 3-Gun, the SRO is pretty awesome. But based on destruction testing I’ve seen, I wouldn’t trust it for CCW or duty carry.

Holosun 507C & 507K

PROS

  • Durable and Reliable
  • Affordable Price
  • Standard Footprints
  • Lots of Options

CONS

  • Not Made In The USA
  • Slightly Less Robust Than RMR

SPECS

  • Footprint: 507C uses RMR, 507K uses RMSc
  • Dot Size: Multiple Options
  • Window Size: 507C 23x16mm, 507K 19.5×14.7mm
  • Battery Life: 50,000+ hours
  • Open Emitter

Rolling these into a single recommendation since they are basically the same optic but with different footprints.

For almost as long as I’ve been alive, China has been a manufacturing powerhouse for… everything. For the past ten years or so, this includes optics.

David's Glock 19 Gen 3 EDC CCW
David’s Glock 19 Gen 3 EDC CCW with a Holosun 407C

Holosun is a Chinese company that makes all of its optics in China. Typically, you might expect this to mean the optics are relatively low quality since that’s what we’ve come to expect. Surprisingly, Holosun breaks out of the norm and instead produces some of the most durable MRDS optics on the market.

In my experience, the only optics more durable than Holosun is Trijicon and Aimpoint – although the newer SIG offerings come very close.

The 507c is a massively popular red dot because it’s a good price (MSRP $341, street around $300), it uses the RMR footprint, it’s insanely durable, and it has groundbreaking features that have since defined the market and forced other optic companies to innovate.

The 507k has the same features and price but uses a modified Shield RMS/SMS footprint. The K series is not directly compatible with all Shield RMS/SMS cuts, some will work, and some won’t since the K isn’t a true copy of the footprint. The Springfield Hellcat needs to be modified or use a mounting plate; the SIG Sauer P365XL does not require modification. You’ll just have to research your firearm and work it out, sorry. 

507C vs 507K
(Left) 507K Vs. (Right) 507C

Speaking of those features, the 507c and 507k have a 50,000-hour battery life using a CR1632 battery, side tray battery replacement, so you don’t need to remove the optic, 10 daylight and 2-night vision settings, IP67 water/dustproof rated, shake awake, and are made from 7075 T6 aluminum.

The 507c has a solar panel that takes over powering the optic when in sunlight, but the 507k is too small and doesn’t have a solar panel.

Both optics have a 2 MOA dot and 32 MOA circle, and you can choose just the dot, just the circle, or both as your reticle.

If you want value for your money, this is the MRDS I would recommend the most.

Something to know about Holosun is it has more model options than we have page space. Almost all of its optics are available in red or green dot. If you want an even more durable option to the 507c, the 508T has titanium in the shroud. You can also get an enclosed MRDS with titanium with the 509T. 

aimpoint acro vs holosun 509t
The Holosun 509T on the left is mounted on CMC Triggers’ new KRAGOS slide with an RMR cut, using an adapter plate. The Aimpoint on the right is attached using the Glock MOS system with an Acro-compatible plate.
Palmetto State Armory $340
Optics Planet $300
Kenzie’s Optics $310

If you want to save some money, the 407c and 407k are cheaper than the 507 versions but only have a dot for a reticle.

Vortex Defender CCW, ST, & XL

PROS

  • Unbeatable Warranty
  • Textured Front Face For Durability And Drills
  • Feature Rich Modern Design

CONS

  • Standardized But Less Common Footprint (ST & XL)

SPECS

  • Footprint: RMSc
  • Dot Size: 3 or 5 MOA
  • Window Size: 20x16mm
  • Battery Life: 9,000+ hours
  • Open Emitter

This might sound harsh, but the Defender-CCW is the first pistol red dot from Vortex that I’ve actually liked. What truly surprised me was how much I liked it.

Vortex was pretty early to the micro-red dot game, but those dots aren’t very good and were quickly outpaced by almost everyone on the market. Vortex hasn’t come out with a new pistol dot design in a long, long time until the Vortex Defender-CCW in 2023.

This dot is good. Real good. And the price is pretty fair.

Using the RMSc footprint, this is a very solid dot in every respect. And something nice from Vortex is they include every screw size and length you can imagine to make mounting extremely easy.

The front serrations on the face of the optic are great for racking the slide off objects if that ever comes up, and the rubber core in the housing is claimed by Vortex to improve durability. I’ll take their word for it since the Defender-CCW has been pretty robust so far.

When the CCW first launched, the emitter refresh rate was pretty low. Thankfully, Vortex has fixed that since the first wave and it now enjoys a much higher refresh rate making for a smooth tracking dot.

Vortex Defender-ST & XL

SPECS

  • Footprint: Delta Point Pro
  • Dot Size: 2 or 5 MOA (ST), 5 or 8 MOA (XL)
  • Window Size: 22x18mm (ST), 25.5×23.3mm (XL)
  • Battery Life: 25,000+ hours
  • Open Emitter

Take everything that the Defender-CCW does and make it a little bigger, that’s the Defender-ST. The good news is that it is basically the exact same dot, just slightly larger in every dimension. The better news is that the emitter is upgraded and provides a high refresh rate that doesn’t stutter when shooting.

The bad news is that because this is basically the exact same dot, just larger and with a new emitter, there isn’t a lot to say about it.

Vortex went with the Delta Point Pro footprint and I’m not crazy about that. This dot is outstanding and one I can highly recommend, but using the DPP footprint really limits the number of guns I can actually use this on.

If you have a gun with a DPP plate or cut, you’re in luck. Otherwise, this might not be the best option.

The XL is more of the same in the best way possible. Yes, still DPP, but that’s the only drawback. The window is huge, it’s a robust optic that is at home on a full-size pistol or even a small rifle or PCC. New to the XL is a redesign of the battery tray making it even easier to change out. Not a critical change, but nice.

MAC 5 with a Vortex Defender XL

For a big dot that doesn’t break your bank, the Vortex Defender XL has my vote.

Vortex Defender CCW $232 @ Brownells
Vortex Defender ST $299 @ Brownells
Vortex Defender XL $380 @ Brownells

Aimpoint ACRO P-2

PROS

  • Enclosed Emitter
  • Ultra Durable
  • Industry Defining Design
  • Best Footprint Design

CONS

  • Expensive
  • Footprint Normally Requires Mounting Plate
  • Small Window

SPECS

  • Footprint: ACRO
  • Dot Size: 3.5 MOA
  • Window Size: 16mm
  • Battery Life: 50,000+ Hours
  • Enclosed Emitter

Aimpoint has long been known as the maker of the most durable full-size red dots and has been widely adopted by militaries around the world. It’s ACRO P-2 might not be as durable as the CompM5, but it’s pretty close.

Using a mounting system unique to the ACRO, you’ll have to get a mounting plate or cut a slide just for the ACRO to use one – but it’s an excellent footprint if you do.

The P-2 is the second generation of the ACRO designed for military and law enforcement; as such, this thing is overbuilt, and the price isn’t cheap.

TangoDown Sig P320 ACRO SSM-02 cover
SIG P320 with Aimpoint ACRO

MSRP is $600, and I haven’t seen it for less than that ever, so expect to pay full weight.

The good news is the features are pretty nice.

16mm square window is a little on the small side, but the 3.5 MOA dot is super crisp, has a 50,000-hour battery life, 6 daylight, and 4 night-vision brightness settings, a CR2032 battery replaceable without removing the sight, and the whole unit is submersible to 115 feet just in case you want to get your Frogman LARP on.

Besides being very well made, what makes the ACRO so durable is the enclosed housing. No exposed emitter means this MRDS never has a problem with rain or dust covering the LED, and the whole unit is better designed for surviving a drop or hit to the housing and glass.

To top it all off, the ACRO has a sacrificial window in front of the lens the LED reflects on. In other words, you can lose your front window and still have 100% functionality.

Brownells $600
EuroOptic $570
Optics Planet $600

It isn’t cheap, but if you want one of the best – this is it.

Lead & Steel Pandora PB-3

PROS

  • Enclosed Emitter
  • Large Window (For An Enclosed Emitter)
  • Bright Dot With Clear Glass
  • Durable

CONS

  • Heavier Than Other Options
  • Shares the Pros and Cons of ACRO Mounting

SPECS

  • Footprint: ACRO
  • Dot Size: 3 MOA
  • Window Size: 21x16mm
  • Battery Life: 30,000+ Hours
  • Open Enclosed emitter

The best new red dot I’ve seen in a long, long time. Lead & Steel isn’t a household name yet, but they are on their way. The Pandora is their first micro-dot and it’s pretty great. Using the ACRO P2 footprint the Pandora is an enclosed red dot that is built to take a huge beating. Larger than the ACRO, my Pandora has lived on 4 different guns for a few thousand rounds downrange and a dozen or more competitions. Durability is outstanding. 

One mark against the Pandora is that it is heavy. The added weight can change the recoil impulse on some pistols. Not a big difference, but if you know what to look for you can feel it sometimes.

Lead & Steel $350

For a small brand getting its foot in the door of the optics world, Lead & Steel has made some outstanding first steps.

SIG Sauer Romeo2

PROS

  • Modular Design
  • Proven Durable Under Heavy Recoil
  • Ultra Clear Glass

CONS

  • Expensive
  • Not Truly Enclosed

SPECS

  • Footprint: Delta Point Pro
  • Dot Size: 3 or 6 MOA
  • Window Size: 30mm
  • Battery Life: 25,000+ Hours
  • Open Emitter

Think of this as the Romeo1 but better in every way. Plus, a new shroud system giving you the option to run the Romeo2 as either an open emitter red dot or an enclosed emitter. 

First off, the specs of the Romeo2 are simply better on every level. 25,000-hour battery life with a CR2032, IPX7 waterproofing, 12 daylight, and 3-night vision settings, 30mm window, 3 or 6 MOA red dot reticles, but also an option for a circle dot kind of like Holosun or EOTech reticle.

SIG Romeo2

A painful MSRP of $770 for the 3 and 6 MOA options and a whopping $880 MSRP for the circle dot are turnoffs. Street prices for all three models, however, seem to be about $50-60 off MSRP.

While those specs are pretty solid, none of it has to do with what makes the Romeo2 awesome.

This is a modular MRDS and actually includes multiple shrouds, so you can tailor the sight to your needs.

If you want something lower profile, you can run the sight normally without any extra shrouds in an open emitter format. Or you can add the half shroud and give yourself some added protection.

SIG Romeo2

Still not enough? Throw on the full shroud and the rear glass piece to form a wholly enclosed MRDS that is hugely more durable than usual.

It takes a bit DIY, but the results are pretty cool and give you many options.

The Romeo2 retains the super clear glass SIG has become known for and even adding the extra glass and full shroud doesn’t seem to take away from that.

Primary Arms $700
Optics Planet $700

Thankfully, the Romeo2 uses the DeltaPoint Pro footprint, so mounting it is a lot easier.

Oh, also, the Romeo2 is assembled in the USA. 

LOOSE ROUNDS

For every budget and every application, you should be able to find an MRDS that works for you. 

My go-to choice for most applications is the Holosun 407, but the Trijicon RMR is outstanding if you’re willing to pay.

When it comes to large window MRDS, I like the Romeo1 as a budget option and the Trijicon SRO for the money choice.

If a closed emitter is your thing, Aimpoint ACRO P-2 is king, but the Holosun 509T will save you a lot of money.

READY FOR MORE?

Enter Your E-Mail to Receieve a Free 50-Target Pack from RECOIL!

NEXT STEP: Download Your Free Target Pack from RECOIL

For years, RECOIL magazine has treated its readers to a full-size (sometimes full color!) shooting target tucked into each big issue. Now we’ve compiled over 50 of our most popular targets into this one digital PDF download. From handgun drills to AR-15 practice, these 50+ targets have you covered. Print off as many as you like (ammo not included).

Get your pack of 50 Print-at-Home targets when you subscribe to the RECOIL email newsletter. We’ll send you weekly updates on guns, gear, industry news, and special offers from leading manufacturers – your guide to the firearms lifestyle.

You want this. Trust Us.

Read the full article here

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button